Yamaha Apex Install Pictures
Donor Sled, 2006 Yamaha Apex, (Thanks Cale). Cale wanted an installation under the hood.
Mounting location, we used wire ties to secure the control unit on the left side of the sled. We used a terminal strips to connect the wires. The control unit pushbutton and LED indicator light are accessible with the side panel removal.
The existing tether kill switch was series wired with the Cordless Teth-Air System. 12 volts was available from a previous accessory installation.
Prepare the antenna with zip ties to mount on the handle bar near the throttle control.
Completed installation, took about 1 hour.